Sidebar Sidebar Sidebar
FIREWIRE ROCKER PANEL STROBE LIGHT INSTALLATION

FIREWIRE ROCKER PANEL STROBE LIGHT INSTALLATION

Posted by FIREWIRE LEDS on 30th May 2016

FIREWIRE LED ROCKER PANEL STROBE LIGHTS is our version of the much needed side lighting for emergency vehicles that provide unmatched visibility for any safety situation. With a large variety of vehicle specific models in a range of different colors FIREWIRE provides a superior lighting solution for the side of your emergency or safety vehicle. Not only are our Rocker Panel Strobe Lights extremely durable, but they are also easy to install.

Installation Instructions:

1. Begin by installing your light into the bracket so that the wiring will be towards your power source. Wipe the Rocker Panel channel with the 3M wipe, remove the red tape from the back of the light, and stick your light into the channel. Be sure not to press to firmly with your fingertips so that you do not damage the light.

2. Next you will position your Rocker Panel onto the location desired. We recommend using the pinch weld on your vehicle as shown below. Determine where you want to mount the Rocker Panel with screws.

3.  After you decide the locations to place the screws remove your Rocker Panel and begin drilling the necessary holes.

4. Now you need to simply mount the Rocker Panel onto your vehicle in the desired location with the mounting screws.

5. Run the wiring to your power source. Feel free to extend the wiring if needed.

6. Repeat to the other side of the vehicle and enjoy.